27.490.000 ₫
Hyte Y60 Black Red Dual Chamber Modern Aesthetic Case – Black/Red, Mid-Tower ATX size
5.990.000 ₫
-
- Dual Chamber Mid-Tower ATX PC Case
- Thiết kế để show ra toàn bộ thành phần linh kiện bên trong máy.
- Bezel-less Panoramic Tempered Glass
- Included PCIE Gen 4 riser để dựng card
- Dual Chamber Mid-Tower ATX PC Case
Cho phép đặt hàng trước
Cam kết hàng chính hãng
100% hàng chính hãng
Đổi trả dễ dàng
Trong 7 ngày
Bảo hành chính hãng
Giao hàng nhanh
Toàn quốc
Y60
Modern Aesthetic Case
Hyte Y60 mid-tower case có thiết kế sáng tạo với bảng điều khiển bằng kính cường lực 3 mảnh để có panoramic view cho bộ máy gaming của bạn. Nó cho phép gắn card đồ họa của bạn theo chiều dọc và thiết kế dual chamber với cool floor cho phép quản lý luồng không khí được tối ưu hóa.
HYTE cam kết tạo ra những sản phẩm có hình thức nghệ thuật và chức năng chuyên nghiệp, phục vụ những người lần đầu lắp máy cũng như dân đam mê.
Panoramic Views
Vertical GPU Mounted
PCIE 4.0 Riser Cable
Antechamber Construction
Cold Floor Cooling
Included Fans
3x Flow FE12
Modern Aesthetic Case
Meet The Y60
Display What You Love
ATX with Modern Aesthetic – The Y60 is an innovative genesis in design for the open ATX chassis. We crafted this case to celebrate your favorite hardware, and show your PC the way it was meant to be seen.
Let Your GPU Take Center Stage
You worked hard to purchase your hardware, so show it off! The Y60 is designed to exclusively display your GPU vertically.
VERTICAL GPU, FRONT AND CENTER
- The included PCIE 4.0 riser cable will support the newest and highest-performing cards, and its color-matched enclosure will unify your system’s look and feel.
- Our riser cable mounts slightly beneath the floor of the case, to cleanly frame your graphics card.
- Worried about cooling? The Y60 includes 120mm fans beneath the floor to draw air up and over your card, maximizing thermal performance and eliminating hotspots.
Included: PCIE 4.0 Cable
- The Y60 has an included riser cable designed to waterfall cleanly over half-height cards attached behind your vertical GPU.
- Our cable has been rigorously tested to meet or exceed the PCIE 4.0 standard for signal integrity, offering maximum stability and compatibility.
Smarter Expansion
- The Y60 uses “Low-profile PCIE Cards” to improve GPU performance and aesthetics, without compromising on expandability.
- Our case supports half-height expansion cards behind the primary graphics card.
- This includes capture cards, SSDs, sound cards, or any other expansion that is offered in a half-height form factor.
Looks Cool, Runs Cooler
The Y60 has a unique airflow path allowing for a wide range of compatibility and plenty of cooling options.
3 Pre-installed Fans
120mm
The Y60 comes prepped with 3 pre-installed 120mm fans – 2 beneath the floor, and one at the back of the case.
SIDE MOUNT – RADIATOR SUPPORT
240/280mm
When a standard ATX motherboard is used, the side mount supports 240/280mm radiators up to 150mm thick.
CEILING MOUNT – RADIATOR SUPPORT
360mm
The top of the Y60 supports up to a 360mm radiator.
Cables, Managed.
Bespoke grommets channel your cables naturally toward their motherboard connections while keeping the rear chamber obscured from view.
GPU power connectors can also be ran through an alternate route in the floor of the case, if desired.
Tie-down points adorn our rear chamber, for strategic management that remains flexible to your needs.
Focused Design
The Y60 features 45 degree chamfers designed to smoothly draw in the eyes of the viewer
- ROOM TO BREATHE
Remove the glass panels for an open-air chassis that loses none of its aesthetic appeal. - TOP AND BOTTOM CHAMFERED “MOLDING”
Our 45-degree view angle captures attention and draws the eye of the viewer into the case.
Chamfered “molding” on the top and bottom of the chassis ground the case visually and allow for glass-free displays. - HIDE THE REST
Our antechamber design hides unattractive cables, keeping your PC clutter-free, visually appealing, and running cool.
Tech Specs
Type
Dual Chamber Mid-Tower ATX Case
Volume
60L
Case Dimensions
456mm (L) x 285mm (W) x 462mm (H)
Case Weight
9.6 kg
Case in Box Dimensions
535mm (L) x 372mm (W )x 540mm (H)
Case in Box Weight
11.3 kg
Case Materials
Tempered Glass, Steel, ABS
Color
White/Black, Black/Black, Red/Black
Motherboard Support
EATX, ATX, mATX, ITX
Power Supply
ATX up to 235mm in length
Video Card Max Dimensions
375mm length, 75mm thick (60mm or less recommended for best cooling)
Fan Support (Side)
2x 120/140mm
Fan Support (Top)
3x 120mm
Fan Support (Rear)
1x 120mm (1x 120mm, 1300 RPM included)
Fan Support (Bottom)
2x 120mm/140mm (2x 120mm, 1300 RPM included)
Radiator Support (Side)
120, 140, 240, 280mm up to 150mm thick
Radiator Support (Top)
120, 240, 360mm up to 30mm thick
Radiator Support (Rear)
120mm
CPU Cooler Height
160mm*
Storage
2x 3.5″ HDD or 4x 2.5″ SSD
Expansion Slots
3 + 6 half-height
PCI Express Riser
4.0 x 16 (included)
Interfaces
Front USB 3.0
2
Front USB 3.2 Gen 2 Type-C
1
Audio/Mic Jack
1
Dust Filters
Bottom, Side, Top
RGB Lighting
None
Chỉ những khách hàng đã đăng nhập và đã mua sản phẩm này mới có thể để lại đánh giá.
Đánh giá Hyte Y60 Black Red Dual Chamber Modern Aesthetic Case - Black/Red, Mid-Tower ATX size
0 khách hài lòng
0 đánh giá
Lọc đánh giá
Tân Thành Danh hỗ trợ bạn
Hotline Mua Hàng
0901 343 881
Tư vấn kỹ thuật
0901 343 881
Showroom
61CT Tam Đảo, Cư Xá Bắc Hải Phường Hòa Hưng, TP.HCM
Sản phẩm tương tự
-8%
Giá gốc là: 5.740.000 ₫.5.290.000 ₫Giá hiện tại là: 5.290.000 ₫.
-39%
Giá gốc là: 3.890.000 ₫.2.390.000 ₫Giá hiện tại là: 2.390.000 ₫.
-46%
Giá gốc là: 5.500.000 ₫.2.990.000 ₫Giá hiện tại là: 2.990.000 ₫.
-22%
Giá gốc là: 370.000 ₫.290.000 ₫Giá hiện tại là: 290.000 ₫.
-20%
Giá gốc là: 2.490.000 ₫.1.990.000 ₫Giá hiện tại là: 1.990.000 ₫.
-32%
Giá gốc là: 1.990.000 ₫.1.350.000 ₫Giá hiện tại là: 1.350.000 ₫.
-8%
Giá gốc là: 7.200.000 ₫.6.590.000 ₫Giá hiện tại là: 6.590.000 ₫.
-11%
Giá gốc là: 3.820.000 ₫.3.390.000 ₫Giá hiện tại là: 3.390.000 ₫.
Đánh giá
Chưa có đánh giá nào.